UIViewController生命周期

　　UIViewControl是IOS程序中的一个重要组成部分，扮演者一个大管家的身份，管理着程序中的众多视图，今天看看了官方文档并做了如下一些简单的记录：

何时加载view，加载的原则是什么，视图何时消失等问题，文档中讲的都很详细。

　　Controller的view最好在需要显示时再去加载，并且在系统发出内存警告时释放比必要的view及相关的数据对象。

一、UIViewController的初始化

　　初始化时会根据需要调用init，initWithCoder等相关函数，这个时候我们可以做一下简单的初始化操作，建立ViewController中需要使用的数据模型等，不建议在初始化阶段就直接创建view及其他与显示有关的对象（应该放到loadView的时候去创建，或者采用懒加载的方法创建）。

　　我们都知道ViewController可以通过代码和xib两种方式创建，这两种方式的初始化流程也不尽相同。

　　1）使用xib创建的VC

　　xib其实最终是会把我们的设置保存成一个数据集，当需要初始化构建VC的时候，回去读取记录的数据集，然后帮我们动态的创建VC，因此可以想象它在初始化时会先去找看是否实现initWithCoder方法，如果该类实现了该方法，就直接调用initWithCoder方法创建对象，如果没有实现的话就调用init方法。调用完初始化方法以后紧接着会调用awakeFromNib方法，在这个方法里面我们可以做进一步的初始化操作。

　　2）使用代码创建VC

　　使用代码创建时，我们根据需要手动的创建VC中的数据，如果自己定制VC时，还需要在init中调用[super init]。

二、UIViewController中View的load和unload

　　前面讲了不建议在VC初始化的时候就创建view及其他与显示相关的代码，官方文档建议将View的初始化操作放到loadView的时候再做，当VC接到内存告警时会调用didRecieveMemoryWarning这个时候我们就要做出响应，释放暂时不需要的对象。如果无视这个警告，系统内存不够用时会会继续发送，如果还得不到处理就会强制退出程序。下面看具体的loadView和unloadView时候都会做什么操作。

　　1）Load周期

　　当需要显示或者访问view属性时，view没有创建的话，VC就会调用loadView方法，在这个时候会创建一个view并将其赋给VC.view属性。紧接着就会调用VC的viewDidLoad方法，这个时候VC.view保证是有值的，可以做进一步的初始化操作，例如添加一些subview。注意:定制VC时，如果覆盖loadView方法，不需要调用[super loadView]方法。

　　2）Unload周期

　　当app收到内存警告的时候，会调用每一个VC的didRecieveMemoryWarning方法，我们需要做出响应，释放程序中暂时不需要的资源。通常都会重写该方法，重写时候需要调用super的该方法。如果检测到当前VC的view可以被安全释放的话，就会调用viewWillUnload方法，这个我们必须要重视，因为当VC的view消失时候它的subviews可能会被一起释放，我们需要根据具体情况做一些记录，以保证下次能够正确创建，同时不出现内存泄漏。调用viewWillUnload以后，会将VC.view属性设置成nil，然后在调用viewDidUnload方法，这个时候我们可以释放那些强引用的对象。

 

官方文档：

https://developer.apple.com/library/ios/samplecode/AdvancedTableViewCells/Introduction/Intro.html

View controllers are an essential part of managing your app’s resources. View controllers allow you to break your app up into multiple parts and instantiate only the parts that are needed. But more than that, a view controller itself manages different resources and instantiates them at different times. For example, a view controller’s view hierarchy is instantiated only when the view is accessed; typically, this occurs only when the view is displayed on screen. If multiple view controllers are pushed onto a navigation stack at the same time, only the topmost view controller’s contents are visible, which means only its views are accessed. Similarly, if a view controller is not presented by a navigation controller, it does not need to instantiate its navigation item. By deferring most resource allocation until it is needed, view controllers use less resources.

When memory available to the app runs low, all view controllers are automatically notified by the system. This allows the view controller to purge caches and other objects that can be easily recreated later when memory is more plentiful. The exact behavior varies depending on which version of iOS your app is running on, and this has implications for your view controller design.

Carefully managing the resources associated with your view controllers is critical to making your app run efficiently. You should also prefer lazy allocation; objects that are expensive to create or maintain should be allocated later and only when needed. For this reason, your view controllers should separate objects needed throughout the lifetime of the view controller from objects that are only necessary some of the time. When your view controller receives a low-memory warning, it should be prepared to reduce its memory usage if it is not visible onscreen.

Initializing a View Controller

When a view controller is first instantiated, it creates or loads objects it needs through its lifetime. It should not create its view hierarchy or objects associated with displaying content. It should focus on data objects and objects needed to implement its critical behaviors.

Initializing a View Controller Loaded from a Storyboard

When you create a view controller in a storyboard, the attributes you configure in Interface Builder are serialized into an archive. Later, when the view controller is instantiated, this archive is loaded into memory and processed. The result is a set of objects whose attributes match those you set in Interface Builder. The archive is loaded by calling the view controller’s  method. Then, the  method is called on any object that implements that method. You use this method to perform any configuration steps that require other objects to already be instantiated.

For more on archiving and archiving, see .

Initializing View Controllers Programmatically

If a view controller allocates its resources programmatically, create a custom initialization method that is specific to your view controller. This method should call the super class’s  method and then perform any class specific initialization.

In general, do not write complex initialization methods. Instead, implement a simple initialization method and then provide properties for clients of your view controller to configure its behaviors.

A View Controller Instantiates Its View Hierarchy When Its View is Accessed

Whenever some part of your app asks the view controller for its view object and that object is not currently in memory, the view controller loads the view hierarchy into memory and stores it in its  property for future reference. The steps that occur during the load cycle are:

1. The view controller calls its  method. The default implementation of the loadView method does one of two things:

   • If the view controller is associated with a storyboard, it loads the views from the storyboard.

   • If the view controller is not associated with a storyboard, an empty  object is created and assigned to the view property.

2. The view controller calls its  method, which enables your subclass to perform any additional load-time tasks.

Figure 4-1 shows a visual representation of the load cycle, including several of the methods that are called. Your app can override both theloadView and the viewDidLoad methods as needed to facilitate the behavior you want for your view controller. For example, if your app does not use storyboards but you want additional views to be added to the view hierarchy, you override the loadView method to instantiate these views programatically.

Figure 4-1  Loading a view into memory

Loading a View Controller’s View from a Storyboard

Most view controllers load their view from an associated storyboard. The advantage of using storyboards is that they allow you to lay out and configure your views graphically, making it easier and faster to adjust your layout. You can iterate quickly through different versions of your user interface to end up with a polished and refined design.

Creating the View in Interface Builder

Interface Builder is part of Xcode and provides an intuitive way to create and configure the views for your view controllers. Using Interface Builder, you assemble views and controls by manipulating them directly, dragging them into the workspace, positioning them, sizing them, and modifying their attributes using an inspector window. The results are then saved in a storyboard file, which stores the collection of objects you assembled along with information about all the customizations you made.

Configuring the View Display Attributes in Interface Builder

To help you layout the contents of your view properly, Interface Builder provides controls that let you specify whether the view has a navigation bar, a toolbar, or other objects that might affect the position of your custom content. If the controller is connected to container controllers in the storyboard, it can infer these settings from the container, making it easier to see exactly how it should appear at runtime.

Configuring Actions and Outlets for Your View Controller

Using Interface Builder, you create connections between the views in your interface and your view controller.

Listing 4-1 shows the declaration of a custom MyViewController class’s two custom outlets (designated by the  keyword) and a single action method (designated by the  return type). The declarations are made in a category inside the implementation file. The outlets store references to a button and a text field in the storyboard, while the action method responds to taps in the button.

Listing 4-1  Custom view controller class declaration

@interface MyViewController()

@property (nonatomic) IBOutlet id myButton;

@property (nonatomic) IBOutlet id myTextField;

- (IBAction)myAction:(id)sender;

@end

Figure 4-2 shows the connections you would create among the objects in such a MyViewController class.

Figure 4-2  Connections in the storyboard

When the previously configured MyViewController class is created and presented, the view controller infrastructure automatically loads the views from the storyboard and reconfigures any outlets or actions. Thus, by the time the view is presented to the user, the outlets and actions of your view controller are set and ready to be used. This ability to bridge between your runtime code and your design-time resource files is one of the things that makes storyboards so powerful.

Creating a View Programmatically

If you prefer to create views programmatically, instead of using a storyboard, you do so by overriding your view controller’s  method. Your implementation of this method should do the following:

1. Create a root view object.

   The root view contains all other views associated with your view controller. You typically define the frame for this view to match the size of the app window, which itself should fill the screen. However, the frame is adjusted based on how your view controller is displayed. See

   You can use a generic  object, a custom view you define, or any other view that can scale to fill the screen.

2. Create additional subviews and add them to the root view.

   For each view, you should:

   1. Create and initialize the view.

   2. Add the view to a parent view using the  method.

3. If you are using auto layout, assign sufficient constraints to each of the views you just created to control the position and size of your views. Otherwise, implement the  and  methods to adjust the frames of the subviews in the view hierarchy. See 

4. Assign the root view to the  property of your view controller.

Listing 4-2 shows an example implementation of the loadView method. This method creates a pair of custom views in a view hierarchy and assigns them to the view controller.

Listing 4-2  Creating views programmatically

- (void)loadView

{

CGRect applicationFrame = [[UIScreen mainScreen] applicationFrame];

UIView *contentView = [[UIView alloc] initWithFrame:applicationFrame];

contentView.backgroundColor = [UIColor blackColor];

self.view = contentView;

levelView = [[LevelView alloc] initWithFrame:applicationFrame viewController:self];

[self.view addSubview:levelView];

}

Note: When overriding the loadView method to create your views programmatically, you should not call super. Doing so initiates the default view-loading behavior and usually just wastes CPU cycles. Your own implementation of the loadView method should do all the work that is needed to create a root view and subviews for your view controller. For more information on the view loading process, see 

Managing Memory Efficiently

When it comes to view controllers and memory management, there are two issues to consider:

• How to allocate memory efficiently

• When and how to release memory

Although some aspects of memory allocation are strictly yours to decide, the  class provides some methods that usually have some connection to memory management tasks. Table 4-1 lists the places in your view controller object where you are likely to allocate or deallocate memory, along with information about what you should be doing in each place.

Table 4-1  Places to allocate and deallocate memory

Task	Methods	Discussion
Allocating critical data structures required by your view controller	Initialization methods	Your custom initialization method (whether it is named init or something else) is always responsible for putting your view controller object in a known good state. This includes allocating whatever data structures are needed to ensure proper operation.
Creating your view objects		Overriding the loadView method is required only if you intend to create your views programmatically. If you are using storyboards, the views are loaded automatically from the storyboard file.
Creating custom objects	Custom properties and methods	Although you are free to use other designs, consider using a pattern similar the method. Create a property that holds the object and a matched method to initialize it. When the property is read and its value is nil, call the associated load method.
Allocating or loading data to be displayed in your view		Data objects are typically provided by configuring your view controller’s properties. Any additional data objects your view controller wants to create should be done by overriding the viewDidLoad method. By the time this method is called, your view objects are guaranteed to exist and to be in a known good state.
Responding to low-memory notifications		Use this method to deallocate all noncritical objects associated with your view controller. On iOS 6, you can also use this method to release references to view objects.
Releasing critical data structures required by your view controller		Override this method only to perform any last-minute cleanup of your view controller class. Objects stored in instance variables and properties are automatically released; you do not need to release them explicitly.

On iOS 6 and Later, a View Controller Unloads Its Own Views When Desired

The default behavior for a view controller is to load its view hierarchy when the  property is first accessed and thereafter keep it in memory until the view controller is disposed of. The memory used by a view to draw itself onscreen is potentially quite large. However, the system automatically releases these expensive resources when the view is not attached to a window. The remaining memory used by most views is small enough that it is not worth it for the system to automatically purge and recreate the view hierarchy.

You can explicitly release the view hierarchy if that additional memory is necessary for your app. Listing 4-3 overrides the method to accomplish this. First, is calls the superclass’s implementation to get any required default behavior. Then, it cleans up the view controller’s resources. Finally, it tests to see if the view controller’s view is not onscreen. If the view is associated with a window, then it cleans up any of the view controller’s strong references to the view and its subviews. If the views stored data that needs to be recreated, the implementation of this method should save that data before releasing any of the references to those views.

Listing 4-3  Releasing the views of a view controller not visible on screen

- (void)didReceiveMemoryWarning

{

[super didReceiveMemoryWarning];

// Add code to clean up any of your own resources that are no longer necessary.

if ([self.view window] == nil)

{

// Add code to preserve data stored in the views that might be

// needed later.

// Add code to clean up other strong references to the view in

// the view hierarchy.

self.view = nil;

}

The next time the  property is accessed, the view is reloaded exactly as it was the first time.

On iOS 5 and Earlier, the System May Unload Views When Memory Is Low

In earlier versions of iOS, the system automatically attempts to unload a view controller’s views when memory is low. The steps that occur during the unload cycle are as follows:

1. The app receives a low-memory warning from the system.

2. Each view controller calls its  method. If you override this method, you should use it to release any memory or objects that your view controller object no longer needs. You must call super at some point in your implementation to ensure that the default implementation runs. On iOS 5 and earlier, the default implementation attempts to release the view. On iOS 6 and later, the default implementation exits.

3. If the view cannot be safely released (for example, it is visible onscreen), the default implementation exits.

4. The view controller calls its  method. A subclass typically overrides this method when it needs to save any view properties before the views are destroyed.

5. It sets its  property to nil.

6. The view controller calls its  method. A subclass typically overrides this method to release any strong references it has to those views.

Figure 4-3 shows a visual representation of the unload cycle for a view controller.

Figure 4-3  Unloading a view from memory